Civil Engineering - Surveying - Discussion
Discussion Forum : Surveying - Section 2 (Q.No. 16)
16.
Keeping the instrument height as 1 
m, length of staff 4 m, the up gradient of the ground 1 in 10, the sight on the up slope must be less than
m, length of staff 4 m, the up gradient of the ground 1 in 10, the sight on the up slope must be less thanDiscussion:
42 comments Page 4 of 5.
Er Meghanada (Bhadrak.Odisha) said:
8 years ago
h = height of the instrument+height of staff/gradient.
Slope = h square (2x staff length).
h = 3/2+4/10
= 1.5 + 0.4 = 1.9.
Slope = 1.9 square (2*4) = 0.45 m.
For 100 m slope = 45 m.
Slope = h square (2x staff length).
h = 3/2+4/10
= 1.5 + 0.4 = 1.9.
Slope = 1.9 square (2*4) = 0.45 m.
For 100 m slope = 45 m.
Garry said:
8 years ago
I agree @Amitkumarsachin.
Ms ali said:
8 years ago
@Amitkumar.
You are right it is 15m.
You are right it is 15m.
Ravi said:
6 years ago
I too agree, 55 is right.
Aamir said:
8 years ago
I also agree with you @Amitkumar, it should be 15m.
Tera bhai said:
8 years ago
Absolutely right @Amit Kumar.
Tanmoy said:
7 years ago
The answer will be 20 because the slope is 1 in 10 it means in every 10 mtr slope height increasing 1 mtr then in 20 mtr it will be 2 mtr where HI is 1.5 mtr ( Slope is UPWARD).
Tanmoy karmakar said:
7 years ago
I agree the answers is 15 m.
Skm said:
7 years ago
Agree, it should be 15 m.
Akash said:
7 years ago
Why H.I is 3/2?
please explain.
please explain.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers