IndiaBIX

Civil Engineering - Structural Design Specifications

Exercise : Structural Design Specifications - Section 2
11.
The thickness of the steel
exposed to weather and accessible for repainting, should be not less than 6 mm
in main members not directly exposed to weather should not be less than 6 mm
in secondary members not directly exposed to weather shall be not less than 4.5 mm
All the above.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
12.
Bending moment values for filler joists
near middle of end span is +
at support next to end support is -
at middle of interior spans is +
at other interior supports is -
all the above.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
13.
A solid slab spanning in two directions at right angles and carrying a uniformly distributed load, is supported on beams. If the length of two such beams A and B perpendicular to each other are x and y (x<y), the load shared by the beam A, is
Answer: Option
Explanation:
No answer description is available. Let's discuss.
14.
The anchorage value of standard U-type hook of a reinforcing bar of diameter d in tension, is
4 d
8 d
12 d
16 d
20 d
Answer: Option
Explanation:
No answer description is available. Let's discuss.
15.
A simply supported beam shall be deemed to be a deep beam if the ratio of its effective span to overall depth, is
2.0
2.5
less than 2
less than 2.5
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers