Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 2 (Q.No. 11)
11.
In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or
Discussion:
28 comments Page 3 of 3.
Tomar said:
9 years ago
@Khan.
You are wrong. The Minimum thickness of slab 100 mm.
You are wrong. The Minimum thickness of slab 100 mm.
Adnan said:
9 years ago
In a simply supported slab the minimum spacing of distribution reinforcement, should not be more than five times the effective thickness of the slab or 600mm.
In a simply supported slab the minimum spacing of main reinforcement, should not be more than three times the effective thickness of the slab or 600mm.
In a simply supported slab the minimum spacing of main reinforcement, should not be more than three times the effective thickness of the slab or 600mm.
Mukesh ogrey said:
9 years ago
A minimum thickness of the slab is 100 mm.
Khan said:
10 years ago
Minimum thickness of slab 150 mm.
So 150*4 = 600 mm = 60 cm.
So 150*4 = 600 mm = 60 cm.
Gaurav singh said:
10 years ago
4d or 450 mm which is lesser.
Maclain said:
10 years ago
Answer must be 45 cm according to 456:2000 (26.3.3).
Er. VIPIN KUMAR RAO said:
1 decade ago
In options the given unit should be in mm (millimeter) not in cm (centimeter).
Nira said:
1 decade ago
@Selva.
How he tell that answer is 60?
How he tell that answer is 60?
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers