Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 2 (Q.No. 11)
11.
In a simply supported slab the minimum spacing of distribution reinforcement, should be four times the effective thickness of the slab or
Discussion:
30 comments Page 2 of 3.
Madhupatel.b said:
8 years ago
Minimum spacing must be greater than 40mm considering the aggregate size.
Tomar said:
9 years ago
@Khan.
You are wrong. The Minimum thickness of slab 100 mm.
You are wrong. The Minimum thickness of slab 100 mm.
Khan said:
10 years ago
Minimum thickness of slab 150 mm.
So 150*4 = 600 mm = 60 cm.
So 150*4 = 600 mm = 60 cm.
Nazir said:
4 years ago
It's only defined upon the length of the slab divided by 20.
Akash ganga chhayapoth said:
3 months ago
After the amendment, it is 3d or 300, whichever is less.
(1)
Maclain said:
1 decade ago
Answer must be 45 cm according to 456:2000 (26.3.3).
Umakant prasad said:
8 years ago
IS456:2000.
5d or 450mm.
Whichever is small.
5d or 450mm.
Whichever is small.
Nazir said:
4 years ago
For simply supported slab thickness L by 20.
(1)
Selva said:
1 decade ago
Based on design only we can finalize that.
Mukesh ogrey said:
10 years ago
A minimum thickness of the slab is 100 mm.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers