Civil Engineering - GATE Exam Questions - Discussion
Discussion Forum : GATE Exam Questions - Section 2 (Q.No. 41)
41.
The following two statements are made with reference to a simply supported under-reinforced RCC beam :
With reference to the above statements, which of the following applies ?
- Failure takes place by crushing of concrete before the steel has yieled.
- The neutral axis moves up as the load is increased.
With reference to the above statements, which of the following applies ?
Discussion:
15 comments Page 2 of 2.
Ishant said:
5 years ago
Yes, D is correct.
Ishant said:
5 years ago
Yes, D is correct.
Aamir said:
5 years ago
In over reinforced section concrete fails first and neutral axis goes down as load is increased answer is B.
Beka said:
3 years ago
Under higher compression force compared to tension force.
Is the neutral axis move above or below the centroidal axis?
Is the neutral axis move above or below the centroidal axis?
Ram said:
1 month ago
@All.
My opinion is;
Statement 1
In under reinforcement section thre area of steel reinforcement purposely provided less than what it need to be as balanced section..then what happen NA will moves up to reduce the area of concrete in stressing to balance the section, the purpose of allow the steel to yield first before concrete fully reach it maz stess.., because ductile property of steel, so when steel yielding first it will take time and shows cracks at bottom fibers rather concrete is brittle and cause sudden failure
Statement 2:
When the load increases, then it will increase the moment when the moment increases, then we have to put more reinforcement. When we put more reinforcement than NA, it shifts downward to balance the section by increasing the stress area of concrete, which causes NA to shift downward
My opinion is;
Statement 1
In under reinforcement section thre area of steel reinforcement purposely provided less than what it need to be as balanced section..then what happen NA will moves up to reduce the area of concrete in stressing to balance the section, the purpose of allow the steel to yield first before concrete fully reach it maz stess.., because ductile property of steel, so when steel yielding first it will take time and shows cracks at bottom fibers rather concrete is brittle and cause sudden failure
Statement 2:
When the load increases, then it will increase the moment when the moment increases, then we have to put more reinforcement. When we put more reinforcement than NA, it shifts downward to balance the section by increasing the stress area of concrete, which causes NA to shift downward
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers