Civil Engineering - Building Materials - Discussion

Discussion Forum : Building Materials - Section 8 (Q.No. 1)
1.
The size of mould for bricks, is generally kept
a little large to specified size
a little small to specified size
equal to specified size
10% larger than specified size
20% larger than specified size.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
36 comments Page 2 of 4.

Chinmay Buddhadev said:   6 years ago
Option - D is the correct answer.

10% large dimension are used for molds.

Viru kapoor said:   6 years ago
Yes, it is 8 to12% larger.

So, Option D is correct.

Vijayakumar said:   6 years ago
It Should have a tolerance of approximately 5%.

So, the given answer is correct.

Virender pal said:   6 years ago
Yes. It should be 10%.

Because the size of mould is kept to be 8-12% greater than the actual size of brick.

Krishna Kumar said:   6 years ago
I think 10% larger is more specific.

Sandeep yogi said:   7 years ago
I think 8-10% of size of mould greater than size of brick because shrink the size of brick after dry.

Viru kapoor said:   7 years ago
It is 10 to 12% larger because of shrinkage after drying.

Deepakrawat said:   7 years ago
8-12% larger than the size of the brick.

Nasib singh said:   7 years ago
I think 10% is right answer.

Praveen said:   7 years ago
10% is correct.


Post your comments here:

Your comments will be displayed after verification.